|
|
Door Accessories |
Smart Parts Door Handles
Billet aluminum machine finish or polished, mount
in any position, works with most after-market and
stock door latch systems, 5 ft. super-flex cable allows
for tight curves/angles. Also great for trunk/hood
release (longer cables available). Includes all mounting
brackets, screws and cable clips, complete instructions
and templates. Easy to disassemble for polishing,
plating or powder coating. Made in Canada.
|
|
5-5/8"
wide x 2-7/8" #2001SP C$239 pr
polished #2001SP-POL C$254 pr
4-3/4" wide x 2-3/8" #2002SP C$239
pr
polished #2002SP-POL C$254 pr
|
 |
Lokar
Interior Door Handles
Very clean looking, no screws showing. Recessed
mounting design, comes complete with mounting back
plate and hardware. A rubber stop provides quiet
return of lever. Available brushed or polished.
|
| |
|
Brushed
IDH-2000 $193
Polished IDH-2001 $193 |
|
Universal
Door Latch Cable Release Kit
Shielded pulley for a more direct pulling angle.
U-cut-to-fit stainless cable wire. Adjust the cable
tension with a threaded connection. This kit eliminates
solid rods and bell cranks, and is compatible with
most door handles and latches.
|
| |
| DLR-2100
$55 |
|
Billet
Arm Rest Door Pulls
Two screw installation, and you can even fit four
fingers in it! Available brushed or polished, in
oval or crescent styles.
Oval:
Exposed length: 4-7/64".
Recessed length: 3-23/32"
Exposed width: 1-5/16"
Recessed width: 15/16"
Total height: 45/64"
Recessed height: 1/2"
Crescent:
Exposed length: 4-41/64"
Recessed length: 4-17/64"
Exposed width: 1-35/64"
Recessed width: 1-23/64"
Total height: 45/64"
Recessed height: 1/2"
|
|
|
|
|
|
|
|
|
IDP-2004
Brushed oval $128/pr
IDP-2005 Polished oval $128/pr
IDP-2002 Brushed crescent $128/pr
IDP-2003 Polished crescent $128/pr |
|
|
Popper
Spring loaded. Gauranteed to pop open the most stubborn
doors. Fully chromed with rubber tip that will not
scratch body or paint. Adjustable spring tension.
|
| |
| DP-2000
$28 each |
|
|
Booster
Help get the striker bolt out of the latch when
the latch is released. Machined aluminum. Feature
bronze guided plunger with o-ring seal. Plunger
may be shortened if needed. Body measures 5/8"
dia. x 2-1/8" deep. Includes stainless mounting
hardware (both wood screws and machine screws with
nylok nuts), plunger bumper and instructions. Can
also be used with trunk lids.
|
| |
| 1550
$42 each |
|
|
|
|
